The Dynacore DW-500 Wireless HDMI/SDI Transmission system utilizes today’s most advanced wireless video transmission technology, which can provide broadcast-class and uncompressed 3G SDI/HDMI HD video signal transmission with no compression and zero delay. The system includes one transmitter and one receiver, where the transmitter provides a 3G/HD SDI input and a HDMI input, and the receiver also provide a 3G/HD SDI output and a HDMI output. The wireless HD system has 2 stick antennas on the transmitter side,and can work in the 5.1-5.9GHz frequency band and can be software configured to be licensed or ISM band for different global regions, as well as the side panel of both the transmitter and receiver have a frequency select knob, which provide a maximum of 10 workable frequency channels, and support a maximum of 4 sets working simultaneously. The wireless system can accept a wide range of DC power input, which is suitable for many kinds of camera battery models. The system also can sustain ±8 kV ESD (HBM, contact discharge), the industry class metal case and professional heat design guarantees robust reliability.
◆ Professional WHDI (MIMO/OFDM) technology
◆ Uncompressed 3G/HD/SD-SDI and HDMI
◆ 2-ch SDI/HDMI embedded audio transmission
◆ 150 meters (LOS) transmission distance
◆ Less than 1ms latency
◆ 5.1-5.9GHz license-free operation frequency
◆ User configurable frequency bands
◆ Multicast – 1 transmitter to multi receivers
◆ Less than 63mW radio power
◆ AES 256bit encryption
◆ All-metal housing, durable
◆ Pure hardware connection; Plug and Play
Input and Output
The transmitter DW-500T supports:
3G/HD/SD-SDI input ×1
The receiver DW-500R supports:
3G/HD/SD-SDI output ×1
The receiver outputs SDI and HDMI simultaneously.
If both SDI and HDMI are input to the transmitter, the receiver will give priority to output the SDI signal.
*Note:Currently D-W500 doesn’t support ARRI ALEXA 1080PSF format video transmission.
Frequency selection and configuration
The wireless suite can work in 5.1-5.9GHz frequency band and be flexibly software configured to licensed or ISM band of global different regions, as well as the side panel of both transmitter and receiver has been installed a frequency select knob, which provide maximum 10 workable frequency channels. See below frequency knob figure.
1 transmitter to multi receivers
You can set several DW-500R receivers at the same frequency bands for 1 DW-500T transmitter to enable the multicast mode.
How to Use Several Sets in One Location
There are 0-9 frequency channels that can be switched by the users.
In one location, to avoid interference to each other, we recommended:
2 sets transmission
Set 1: channel 3 Set 2: channel 4
3 sets transmission
Set 1: channel 3 Set 2: channel 7 Set 3: channel 4
*Note: We don’t suggest to use 4 or more sets of wireless transmission systems in one location.
How to get the most out of your wireless transmission
a) Set the receiver DW-500R as high as possible.
b) Avoid walls, trees, water and any blockage as best as you can.
Includes the following:
1x DW-500T Transmitter (D54S/F970/U60 DV battery mount optional)
1x DW-500R Receiver (D54S/F970/U60 DV battery mount optional)
1x Articulating arm
1x Crab clamp
2x D-tap to 4 pin pole cables
2x Flat screwdrivers (for band configuration)
1x Airtight hardcase